Thermo King CRR-40 119 Скачать руководство пользователя

Страница: 68 / 170

MP-3000a Controller

Figure 16: Setpoint Menu Screen Flow Diagram

Changing the Humidity Mode
Setting

1. Press the SETPOINT key. The SETPOINT

menu appears with the cursor in the “TEMP
SETP” line.

2. Press F2 key to scroll to “HUM CONTROL”

line.

3. To change the mode setting, press F4 key.

Cursor moves to end of menu line and flashes.

4. Press F2 key to toggle between OFF and ON.

5. With the desired state in the menu line, press

and hold F4 key until cursor stops flashing.
New mode setting appears in display.

6. Press ESC key to exit the SETPOINT screen.

Changing the Humidity Setpoint

1. Press the SETPOINT key. The SETPOINT

menu appears with the cursor in the “TEMP
SETP” line.

2. Press F2 key to scroll to “HUM SETP” line.

3. To enter a new setpoint, press the F4 key. An

Enter Arrow appears in the menu line and the
current setpoint disappears.

4. Enter (type) the new setpoint in the LCD

display using the general purpose keypad. The
cursor moves to the right of the screen as each
key entry is acknowledged and displayed.

NOTE: Always check that the setpoint
entered in the LCD display is correct before
proceeding.

5. Press and hold the F4 key until the cursor

stops flashing. The new setpoint is recorded in
the controller and appears in the LCD display.

6. Press ESC key to exit the SETPOINT screen.

Data Menu

NOTE: Information can ONLY be displayed
using the Data menu. Items can NOT be
changed.

The Data menu displays general unit operating
information including sensor temperatures, unit
electrical data, etc.

Viewing the Data Menu

With the unit On/Off switch ON and the LCD
display showing the standard display (setpoint):

1. Press F4 key to directly enter the Data menu.

Menu items appear in LCD display.

Note: All screens are not present on all units.

The screens that display on the controller are
determined by the Controller Software setting

and the options installed on the unit.

Setpoint Menu

Enter a Temperature or
Humidity Setpoint

Activate Humidity
Control or Economy
Mode

OPTI -SET

TEMP. SETP.

BULB MODE

EVAP FAN SPD.

DEFROST TRM.

ECONOMY MODE

HUM CONTROL

HUM SETP.

AFAM

AFAM DELAY

AFAM RATE

CO2 MAX.

• Press F4 key.
• Type the new setpoint.
• Press and hold F4 key until cursor

stops flashing.

• Press F4 key.
• Press F2 key to toggle setting

between off and on.

• Press and hold F4 key until

cursor stops flashing.

Содержание CRR-40 119










































































































































































Результаты поиска

Содержание CRR-40 119

Отзывы:

Похожие инструкции для CRR-40 119

Бренды по названию

Популярные бренды

Thermo King CRR-40 119, Руководство пользователя

Результаты поиска

Содержание CRR-40 119

Отзывы:

Похожие инструкции для CRR-40 119

Бренды по названию

Популярные бренды