Thermo King CRR-40 119, Руководство пользователя

Страница: 169 / 170

169
MPC2000ID Controller Menu Flow Diagram
Standard Display
MAIN
MENU
— DATA — ALARMS — COMMANDS — MISC FUNCTIONS — CONFIGURATION — DATALOGGER — RMM STATE
NOTE: The screens that display on the controller are determined by the Unit Configuration setting. All screens are NOT
present on all units.
Keypad Operating Tips
Text Input:
Use F1, F2, F3 and F4 keys to enter text in information screens:
• To enter a number: Press the F1 key and the desired number key. • To enter 1st letter on a key: Press the F2 key, the desired letter key. • To enter 2nd letter on a key: Press the F3 key, the desired letter key. • To enter 3rd letter on a key: Press the F4 key, the desired letter key. NOTE: When a function key (F1, F2, F3 or F4) is pressed to enter text, the keypad remains on that “character level” until another function key is pressed. To Enter a Controller Menu or Use Special Function Key: • Press F4 key to directly enter the Data menu. • Press F2 key to directly enter the Alarms menu. • Press F3 key to directly enter the Main Menu. • Press SETPOINT key to enter Setpoint menu. • Press
C/F key to view alternate temperature scale in LED display.
• Press SUP/RET key to view alternate sensor temperature in LED display. • Press DEFROST key to initiate a manual defrost. Evaporator coil tempera-
ture must be below 10 C (50 F).
To Enter a Submenu, a Command or a New Value in a Text Screen: • Press F4 key. To Scroll in a Menu or a Text Line: • Press F2 key to scroll up or forward. • Press F3 key to scroll down or backward. To Exit a Menu or Text Line: • Press F1 (ESC) key. Special Function Keys: • Press
C/F key to view alternate temperature scale in LED display.
• Press DEFROST key to initiate a manual defrost. Evaporator coil tempera-
ture must be below 10 C (50 F).
• Press SUP/RET key to view alternate return/supply- sensor temperature in
LED display.
To Lock a LCD Data Screen Display: • Each time the “5” key is pressed, the display time of the current LCD screen
increases by 5 minutes. Maximum display time is 30 minutes for data screens and 100 minutes for manual tests. Press F1 (ESC) key to exit dis- play.
Setpoint Menu
— Setpoint Temperature — Humidity Control — Humidity Setpoint — Economy Mode
RMM Status
Display shows current status: • Offline • Zombie • On-line
Data Menu
— Supply Air Temp, RH — Return Air Temp — Defrost (Evap Coil) Temp — Condenser Coil Temp — KVQ Valve Setting — Ambient Temp — High Pressure — High Pressure Temp — Relative Humidity — Battery Voltage — Voltage Average — Voltage 1 —
Voltage 2
—
Voltage 3
— Frequency — Zero Current — Current Phase 1 — Current Phase 2 — Current Phase 3 — Supply Air Temp, LH
Commands Menu
— Defrost — Function Test — PTI (Pretrip) Test — Manual Function Test — Power Management
Alarms Menu
• View and write down all alarm
codes.
• Press F2 key to view the next
alarm code.
• Clear alarm code by correcting
problem and acknowledging the alarm.
• To acknowledge an alarm,
press F4 key with alarm code in display.
To Activate a Command
• Press F4 key to start a:
- Manual Defrost - Function Test - PTI (Pretrip) Test
Manual Function Test
Submenu
• First Component Test appears
in display.
• Press F2 or F3 key to scroll to
to the desired component: - Condenser Fan - Compressor - Capacity 25% - Capacity 50% - Capacity 100% - Injection Valve - Dehumidify Valve - Evaporator High - Evaporator Low - Heat - Zero Current - Sensor Checks
• Press F4 key to start and stop
test (toggle component display between ON and OFF).
• More than one component
can be turned ON at a time to perform a functional test of the unit.
Power Management Submenu
• Current Power Limit and Power
Time appear in display.
• Press F3 key to scroll to
desired function.
• Press F4 key.
- Power Limit: Press F2 or F3
key to scroll to new setting.
- Power Time: Type the new
time in hours.
• Press and hold F4 key until
cursor stops flashing.
Misc. Functions Submenu
• Current function setting appears
in display.
• Press F3 key to scroll to desired
function.
• Press F4 key to change a
setting.
• Type new value; or press F3
key to toggle value to desired setting.
• Press and hold F4 key until
cursor stops flashing.
Configuration Submenu
• Current function setting
appears in display.
• Press F4 key to change a
setting.
• Press F2 key, “A” key (pass-
word), F4 key and EXIT key.
• Type new value; or press F3
key to toggle value to desired setting.
• Press and hold F4 key until
cursor stops flashing.
Datalogger Submenu
• First function screen appears:
- Inspect Temp Log: Press F4
key to view next screen. Press F3 key to scroll through previous logs of sensors.
- Inspect Event Log: Press F3
key to scroll through previous event logs.
- Set Log Time: Press F3 key to
scroll through log interval list. Press and hold F4 key until cursor stops flashing.
- Activate Tripstart: Press F4
key to enter trip start marker.
- Inspect PTI Log: Press F3 key
through test result screens.
Enter a Temperature or
Humidity Setpoint
• Press F4 key. • Type the new setpoint. • Press and hold F4 key until
cursor stops flashing.
Activate Humidity Control or
Economy Mode
• Press F4 key. • Press F2 key to toggle setting
between OFF and ON.
• Press and hold F4 key until
cursor stops flashing.
Datalogger Menu
— Inspect Temp Log — Inspect Event Log — Set Log Time — Activate Tripstart — Inspect PTI Log
Configuration Menu
— In-Range — Container ID — Contrast — Language — Economy Max. — Economy Min. — Unit Type — Reefer Type — Zero Current — Supply LH
Misc. Functions Menu
— Date Time — C/F Mode — Cargo Data — Program Version — Run Time