Thermo King B-100-10, Руководство по установке

Страница: 18 / 64

18
Installing the Condenser Unit (front-mounted)
1. Cut the routing guide C down as indicated in the illustration.
2. Fasten the adhesive tape
T
(supplied by Thermo King) to the rear of the
structure.
3. Fasten two strong straps attached to a crane to the unit. Lift the unit,
making sure that it remains in a horizontal position. If it does not,
change the position of the straps.
4. Pass the 4 locks crews through the holes of the structure and fix them
with a flat washer.
5. Fit the unit by twisting a nut and a Grower washer onto each screw.
Before tightening the screws completely, remove the straps and the
crane.
6. Reassemble the electrical box and canalizer support brackets.
7. Route the hoses through the correct hole in the structure.