Thermo King B-100-10, Руководство по установке

Страница: 50 / 64

50
Installing the Hose Covers
1. Place (but do not fit for the moment) the elbow-shaped curved section,
aligning it so that the inside coincides with the rim of the hose outlet
hole.
2. Mark the left-hand baseline.
3. Mount and fit the straight section of the cover. To ensure the correct
curvature, the total width should be 446 mm.
4. If necessary, fit additional straight sections.
5. Cut the last straight section to the required length.
6. Secure the hoses using the clamps, choosing the best possible location.
7. Mount and fit the elbow-shaped curved section of the cover.
NOTE: The hoses may be connected before or after fitting the straight
section of the cover, depending on the particular characteristics of each
installation.