Thermann TH32END5L, Руководство по установке

Страница: 29 / 32

29
13.2 WATER QUALITY
All Thermann water heating appliances are constructed from high quality materials and components and all are
certified for compliance with relevant parts of Australian and New Zealand gas, electrical and water standards.
Whilst Thermann water heaters are warranted against defects, the warranty is conditional upon correct
installation and use, in accordance with detailed instructions provided with the heater. In the case of the water
supplied to the heater, it is important that the water quality be of acceptable standard.
The water quality limits/parameters listed in water quality table are considered acceptable and generally,
Australian and New Zealand suburban water supplies fall within these limits/parameters.
In areas of Australia and New Zealand where water may be supplied, either fully or partly, from bores, artesian
wells or similar, one or more of the important limits may well be exceeded and the heater could, therefore, be at
risk of failure.
Where uncertainty exists concerning water quality, intending appliance users should seek a water analysis from
the water supplying authority and in cases where it is established that the water supply does not meet the
quality requirements of the water quality table, the Dux warranty would not apply.
WATER QUALITY TABLE
Maximum levels:
pH Saturation
Index(LSI)
(langelier)
Total
Hardness
Chlorides Sodium Iron Silicon
Dioxide
(SiO
2
)
6.5-9 +0.4 to
Minus 1.0
@65C
200 mg/L 250 mg/L 180 mg/L 1 mg/L 50 mg/L