Thermann TH32END5L Скачать руководство пользователя страница 19

Страница: 19 / 32

Ground

To prevent electrical shock, always plug power lead

into an earthed point.

8.1 Water Heater

Electrical Shock Hazard

Do not connect the electrical power to the

appliance until all Remote Controllers have been

connected.

It may result in death or serious injury from

electrical shock.

WARNING

Electrostatic discharge can affect electronic

components.

Take precautions to prevent electrostatic

discharges from personnel or hand tools during

the Water Heater installation and servicing to

protect product’s electronic control.

CAUTION

Power Supply

• The Water Heater is equipped with a 1.5 m cable

with a three pinned earthed plug to be connected

to 230 - 240 VAC at 50 Hz.

The power consumption may be up to 246 W.

Use an appropriate circuit.

• The Water Heater requires 230-240 VAC 50 Hz in

Australia and New Zealand, weatherproof plug

installed in a protected position adjacent to the

appliance.

• If the power cord is damaged and requires

replacement, use only an original spare part

available from the manufacturer.

• Tie the redundant power cord outside the Water

Heater. Putting the redundant length of cord

inside the Water Heater may cause electrical

interference and faulty operation.

NOTE

• Do not let the power cord

contact the gas piping.

• Do not disconnect the electrical

power when not in use. When

the power is off, the freeze

prevention in the Water Heater

will not operate, resulting in

possible freezing damage.

8. Connecting Electricity

1.Red

2.Black

3.White

4.Green

5.Blue

6.Blue

1.Red

2.Black

3.White

4.Green

5.Blue

6.Blue

1.Red

2.Black

3.White

4.Green

5.Blue

6.Blue

1.White

2.Green

3.Red

4.Black

5.Blue

6.Blue

Quick Connect

Cord

“Quick Connect

Cord” tag

• The wire coloring on the Quick Connect Cord

will not be the same as the wire coloring of the

connection plug inside the Water Heater.

8.2 Quick Connect Cord

NOTE

For Quick Connect Multi-System

installation only use the Quick

Connect Cord (part No. CF-

0706377, sold separately).

NOTE

Do not connect the Remote

Controller to both Water Heaters.

If the Remote Controller is

connected to both Water Heaters,

remove the unnecessary Remote

Controller before connecting the

Quick Connect Cord.

• The Remote Controller can be connected to

either Water Heater A or B only.

Содержание TH32END5L

































Результаты поиска

Содержание TH32END5L

Отзывы:

Бренды по названию

Популярные бренды

Thermann TH32END5L, Руководство по установке

Результаты поиска

Содержание TH32END5L

Отзывы:

Бренды по названию

Популярные бренды