Thermal Arc PRO-WAVE 300 TSW, Руководство по обслуживанию

Страница: 36 / 110

PRO-WAVE 300TSW
4-6 August 10, 2005
4.04 Weld Parameters for Pro-Wave 300TSW
Weld HF
Parameter STICK TIG
PRE-FLOW
0.0 to 1.0 sec 0.1 sec 0.1 sec No Yes Yes
HOT START 0 to 70A 20A 1A Yes Yes No
INITIAL CUR.
5 to 300A 30A 1A No Yes Yes
UP SLOPE 0 to 15 sec 1 sec 0.1 sec No Yes Yes
PEAK CUR.
5 to 300A 120A 1A No Yes Yes
WELD CUR
(TIG)
WELD CUR (STICK)
5 to 300A 80A 1A Yes No No
SPOT TIME 0.5 to 5.0 sec 2 sec 0.1 sec No Yes Yes
PULSE WIDTH
15 to 80% 50% 1% No Yes Yes
See
Table 6
AC FREQUENCY
15 to 150Hz 50Hz 1Hz Yes Yes Yes
WAVE BALANCE 10 to 65% 50% 1% Yes Yes Yes
DOWN SLOPE
0 to 25 sec 3 sec 0.1 sec No Yes Yes
CRATER CUR.
5 to 300A 30A 1A No Yes Yes
POST-FLOW
0.0 to 60 sec 10 sec 0.1 sec No Yes Yes
Yes Yes
5 to 300A 80A 1A No Yes Yes
PULSE FREQ.
0.5 to 500Hz 100.0Hz No
Weld Mode
Parameter
Range
Factory
Setting
Incremental
Unit
LIFT
TIG
Table 4-4: Weld Parameters for Pro-Wave 300TSW
PULSE FREQ.
Range Incremental Unit
0.5 to 20Hz 0.1Hz
20 to 100Hz 1Hz
100 to 500Hz 5Hz
Table 4-5: PULSE FREQ. Range and Incremental Units