Thermador PRG486JDG/01, Руководство по обслуживанию, Страница: 29 / 91

Service Manual for the Thermador Pro Grand Next Generation 48-Inch Natural Gas and LP Gas Ranges, Models:
PRG486JDG/01, PRL486JDG/01
58300000159722_ARA_EN_D
Page 30 of 92
1. Follow all safety precautions and steps in Preparing the Range for
Servicing, page 22.
2. Complete steps for Accessing Components under the Maintop,
page 22.
3. Remove the backguard (see Backguard Removal and
Replacement, page 61 ).
Figure 29: Removing Screw from the Top, Front of Side Panel
1 Screw (1) on side panel, at the top, front
4. Remove and retain the screws that secure the side panel (see
Figure 28 on page 29, and Figure 29).
5. Use a rachet with 6-inch long (minimum) swivel head extension,
fitted with a 5/16 inch deep-well socket to remove and retain the
nut with lockwasher on the upper and lower screws (see Figure 30
and Figure 31, page 31).
NOTE: Removing the lower nut with lockwasher may require first
removing the simmer control board (see Simmer Control Board
Removal and Replacement, page 51 ).
-OR-
Alternatively, you can use a 6-inch long (minimum) flex extension,
fitted with a 5/16 inch deep-well socket to remove and retain the
nut with lockwasher from both the upper and lower screws (see
Figure 32, page 31).
6. Remove a side panel by lifting it up and outward; it detaches from
the tab that is on the control panel (see Figure 37, page 33).