The Fire Brick D95 Скачать руководство пользователя страница 16

Страница: 16 / 47

What’s In the Kit

FIBREGLASS DOME FORMWORK

To lay the last few rows of bricks in the dome we provide you with a fibreglass dome form, made to the same

curve as the oven dome. It comes with a round timber support, to spread the load when you jack it into position.

HYBRID REFRACTORY BEDDING MORTAR

Dry Airset Refractory Mortar: 1 x 20kg bag
This is the mortar you will use to lay the fire brick tiles that make up the oven floor. Please be aware that you

will need to mix the Airset mortar with General Purpose Cement, Hydrated Lime and Washed Sand* in the ratio

shown on the bag. This makes a smooth hybrid mortar mix perfectly suited to bedding down fire bricks for

oven floors.

REFRACTORY MORTAR (TWO PART MIXTURE)

Refractory Mortar Part A: 3 x 25kg bags

Refractory Mortar Part B: 1 x 25kg bag

This is the mortar you’ll use to lay

all

of the remaining bricks in the kit. It is rated to fill joints up to 80mm width.

PRECAST FLUE GALLERY

The PreCast Flue Gallery is the molded section that fits over the brick arches at the front of the oven. Made

from refractory castable and reinforced with stainless steel fibres, it’s fitted with 7” Stainless Steel Flue sleeve,

ready to attach the flue section onto. A brushed stainless steel ring covers the flue expansion joint.

CERAMIC FIBRE BLANKET

One full roll and one half roll of 25mm thick Ceramic Fibre Blanket are provided, which will give you two full

layers over your brick dome for 50mm coverage which is precisely what we recommend.

PERLITE RENDER

LiteFill Perlite: 2 x 100L bags
This is the material you will use to cover the Ceramic Fibre Blanket layer, which you will be mixing with GP

Cement, Hydrated Lime and Washed Sand* to make a high-build Render mixture. There is enough Perlite in

the kit to build up a 50mm shell of render over the oven dome, with plenty left in reserve if some is wasted on

accident.

* Sand, Hydrated Lime and GP Cement are available at hardware stores and need to be purchased in addition to the kit.

STAINLESS STEEL FLUE & HAT

1 x 7” Stainless Steel Flue - 900mm Length

1 x 7” Stainless Steel Cowling

Kit Contents

Содержание D95
















































Результаты поиска

Содержание D95

Отзывы:

Похожие инструкции для D95

Бренды по названию

Популярные бренды

The Fire Brick D95, Инструкция пользователя

Результаты поиска

Содержание D95

Отзывы:

Похожие инструкции для D95

Бренды по названию

Популярные бренды