The Fire Brick D95 Скачать руководство пользователя страница 15

Страница: 15 / 47

Kit Contents

What’s In the Kit

CALCIUM SILICATE BOARD

3 x Calcium Silicate Boards 1000x615x50mm

This is the 50mm thick insulation board layer that you will install underneath your oven; it comes with printed

paper templates & drawing pins so that you can pin the templates onto the CalSil board and cut out the pieces

you need, following the lines shown on the paper templates.

REFRACTORY CASTABLE

1 x Novaref Refractory Castable 25kg bag

Refractory Castable is premixed high temperature concrete, which you’ll use to pour the dome keystone.

FIRE BRICKS - OVEN DOME

All bricks for the Oven Dome are provided, carefully cut to keep the internal gaps on the inside face of the oven

to a minimum. These fire bricks are 38% Alumina, rated to 1350°C and are 115mm thick.

FIRE BRICKS - FLOOR TILES

The Floor Tiles are all cut to size and ready to lay; the center tile has a 3mm hole pre-drilled in the center for

the trammel tool to lock into. The fire bricks used in the oven floor are 38% Alumina, rated to 1350°C with an

exceptionally hard wearing surface, and are 50mm thick.

FIRE BRICKS - ENTRY & VENT ARCHES

The bricks for the Entry and Vent Arches that form the mouth of the oven are all cut to size from 38% Alumina

fire bricks rated to 1350°C, ready to lay.
The Entry Arch Bricks (the opening into the dome) are machine-ground on their back face to follow the curvature

of the dome, to give you a smooth transition from the dome into the opening.

The Vent Arch Bricks are carefully selected as these will be on display at the front of the oven. They are all cut

to size, and are designed to lock into the Entry Arch for strength and stability.

FORMWORK - ENTRY & VENT ARCHES

We provide CNC machined timber formwork with your kit to construct the Entry and Vent Arches around, to

ensure that your brickwork is exactly as per our design. The Formwork is clearly marked to help you position

the arches accurately, and has machined markings showing the location and thickness of each mortar joint.

TRAMMEL TOOL

The trammel is a tool that you will clamp each dome brick into, enabling you to lay the dome bricks in a perfect

hemisphere. It has a hardened pin in the base that fits into the 3mm hole drilled in the center tile.

What’s Inside the Kit

Содержание D95
















































Результаты поиска

Содержание D95

Отзывы:

Похожие инструкции для D95

Бренды по названию

Популярные бренды

The Fire Brick D95, Инструкция пользователя

Результаты поиска

Содержание D95

Отзывы:

Похожие инструкции для D95

Бренды по названию

Популярные бренды