Groen C/2-20G Скачать руководство пользователя

Страница: 1 / 25

• •

IMPORTANT INFORMATION

• •

KEEP FOR OPERATOR

• •

IMPORTANT INFORMATION

• •

OPERATOR MANUAL

OM-CC-G and C/2-G

Part Number 121086

DOMESTIC

MODEL: CC10-G, (2)CC10-G

C/2-20G, (2)C/2-20G

CONVECTION COMBO™

Combination Steamer-Oven

THIS MANUAL MUST BE RETAINED FOR FUTURE REFERENCE. READ, UNDERSTAND AND

FOLLOW THE INSTRUCTIONS AND WARNINGS CONTAINED IN THIS MANUAL.

FOR YOUR SAFETY

DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS

AND LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE

POST IN A PROMINENT LOCATION

INSTRUCTIONS TO BE FOLLOWED IN THE EVENT USER SMELLS GAS.

THIS INFORMATION SHALL BE OBTAINED BY CONSULTING YOUR LOCAL

GAS SUPPLIER. AS A MINIMUM, TURN OFF THE GAS AND CALL YOUR

GAS COMPANY AND YOUR AUTHORIZED SERVICE AGENT. EVACUATE

ALL PERSONNEL FROM THE AREA.

WARNING: IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION,

SERVICE OR MAINTENANCE CAN CAUSE PROPERTY DAMAGE, INJURY

OR DEATH. READ THE INSTALLATION, OPERATING AND MAINTENANCE

INSTRUCTIONS THOROUGHLY BEFORE INSTALLING OR SERVICING THIS

EQUIPMENT.

(2)CC10-GF

C/2-20GF with

optional pan racks

Information contained in this document is

known to be current and accurate at the time

of printing/creation. Unified Brands recom-

mends referencing our product line websites,

unifiedbrands.net, for the most updated

product information and specifications.

Содержание C/2-20G


























Результаты поиска

Содержание C/2-20G

Отзывы:

Похожие инструкции для C/2-20G

Бренды по названию

Популярные бренды

Groen C/2-20G, Руководство оператора

Результаты поиска

Содержание C/2-20G

Отзывы:

Похожие инструкции для C/2-20G

Бренды по названию

Популярные бренды