The Airplane Factory Sling 4, Руководство по обслуживанию

Страница: 246 / 344

DOCUMENT No.: REVISION: 1.2 DATE: 2014/11/10
DC-MAM-001-X-C-2 Page 228
6.4 FUEL SELECTOR UNIT ASSEMBLY / DISASSEMBLY
TOOLS / EQUIPMENT REQUIRED
ITEM QUANTITY NOTES
1 ½ inch Spanner. 1 Fuel hose fittings.
2 7/16 Spanner. 1 Fuel hose fittings.
The above list is not necessarily a complete list of all required tools and equipment needed. A calibrated torque
wrench (with adequate range) and the correct size (as implied by the above tool list) accessories (sockets etc.)
are implied for torqueing bolts / nuts, if applicable. Refer to paragraph 1.5 for torque values.
CONSUMABLE MATERIAL REQUIRED
ITEM QUANTITY NOTES
1 Loctite 577. As needed. Fuel hose fitting threads.
The above list is not necessarily a complete list of all material needed. Refer to the Sling 4 construction manual.
AUTHORISED PERSONNEL
Any person performing maintenance of any kind on the aircraft or any component thereof must do so in
accordance with national legislation. This is the responsibility of the aircraft owner and any person who is to
perform any maintenance on the aircraft.
ASSEMBLY / DISASSEMBLY
1. Fitting (1) is screwed into the fuel selector unit body (2). Fitting (3) (for 8 mm or 6 mm inner diameter fuel pipe
(refer to Figure 54)) is screwed into fitting (1). Apply thread locking sealant to fitting (1) and (3) threads before
fitment.
2.
Align the fuel hose fittings for easy fit and alignment with the fuel hoses (refer to Figure 55).
3. Reverse the above to disassemble the fuel selector unit.
1
2
3
1
3