Thales ProtectToolkit 5.9.1, Руководство по установке и настройке

Страница: 69 / 94

Chapter 4: ProtectToolkit Software Installation
> List directory contents, for the current platform or all platforms
>
Install a package from the directory (which also installs the utility in
/usr/bin
)
> Change the default operating mode (hardware or software-only).
Whenever the utility installs a package, it also installs itself on the host system's hard disk (in /usr/bin/safeNet-
install.sh ). This copy can be used to uninstall or configure the software.
You must become the superuser of the host system before adding or removing any packages.
NOTE If you are installing ProtectToolkit 5.9.1 on an AIX system, you must first download
ProtectToolkit 5.9 from the Thales Support Portal and install it by following the procedures
described in this section.
The following procedures are described below:
> "Utility Startup" below
> "Available Packages" on the next page
> "Installing a package" on page 71
> "Setting up your environment" on page 71
> "Changing the Cryptoki provider" on page 72
> "Configuring ProtectToolkit" on page 72
> "Uninstalling a package" on page 73
> "Boot Service Operation on Unix/Linux Platforms" on page 73
Utility Startup
Options can be specified when executing the safeNet-install.sh command. These options are not normally
required and are mainly useful for troubleshooting. To troubleshoot an issue you are experiencing while using
the installation utility, refer to
ProtectToolkit 5.9.1 Installation Issues
in the
ProtectServer HSM and
ProtectToolkit Troubleshooting Guide .
Syntax
safeNet-install.sh
[
-h
] [
-p
] [
-s
<size>] [
-v
]
Option Description
-h Show help.
-p Plain mode. In this mode the ‘ tput ’ is not used for video enhancements.
-s <size> Override the screen size (default = ‘ tput lines/cols ’ or 24x80 ).
-v Print the version of this script.
If you wish to enter platform-specific commands manually, use the commands given in
"Installing
ProtectToolkit on Linux Manually" on page 73
.
Thales ProtectServer HSM 5.9.1 ProtectServer HSM and ProtectToolkit Installation and Configuration Guide
2021-11-02 08:51:40-04:00 Copyright 2009-2021 Thales Group
69