Chapter 2: ProtectServer External 2 Installation and Configuration
5.
Exit PSESH.
psesh:>
exit
Updating the Appliance Software
The following procedure allows you to update the software image on your ProtectServer External 2 appliance
using a secure package.
Prerequisites
>
Download the secure package file from the Thales Customer Support Portal (see
).
>
You must have
admin
access to the appliance.
>
The Admin token must be initialized. See
in the "Command Line Utilities Reference" section of the
ProtectToolkit-C Administration Guide
for more information about initializing the Admin token.
To update the appliance software
1.
Use
scp
(Linux/UNIX) or
pscp
(Windows) to securely transfer the secure package file to the appliance
filesystem. Enter the
admin
password when prompted.
pscp
<filepath>
\
<filename>
admin@
<appliance_hostname/IP>
:
scp
<filepath>
/
<filename>
admin@
<appliance_hostname/IP>
:
2.
Connect to the appliance using a monitor and keyboard, serial connection, or SSH, and log in as
admin
.
3.
[Optional] Confirm that the package is available to install.
psesh:>
package listfile
4.
Install the secure package, specifying the package filename and the authorization code. If the HSM is
initialized, enter the Admin Token PIN when prompted.
psesh:>
package install -spkgfile
<filename>
-authcode
<authcode>
5.
Reboot the appliance to complete the update.
psesh:>
sysconf appliance reboot
Thales ProtectServer HSM 5.9.1 ProtectServer HSM and ProtectToolkit Installation and Configuration Guide
2021-11-02 08:51:40-04:00 Copyright 2009-2021 Thales Group
37
