![Thales ProtectToolkit 5.9.1 Скачать руководство пользователя страница 17](http://html1.mh-extra.com/html/thales/protecttoolkit-5-9-1/protecttoolkit-5-9-1_installation-and-configuration-manual_1099198017.webp)
Chapter 1: ProtectServer PCIe 2 Hardware Installation
>
Functionality Module (FM) storage: 8 MB.
>
Secure Memory File System (SMFS) storage for keys and cryptographic materials: 4 MB shared between
the firmware and FMs.
Hardware Reference
This appendix contains hardware specifications and instructions on how to fit the HSM with an external tamper
detector such as a micro switch.
Adapter Modification for External Tamper Detectors
Connect additional tamper detection devices using the tamper input header, located on the rear face of the
card, as illustrated in
.
Figure 2: Rear face of the card
To fit an external tamper detection device
1.
Remove the default jumper/shunt that bridges the two posts in the ProtectServer PCIe 2's tamper input
header (see
).
2.
Connect your external tamper device in the shunt's place.
The cable end from your tamper-detection device must match the Molex socket on the adapter, which is
designed to fit with an insertable connector housing (Molex part 35507-0200).
a.
Crimp a pair of 2 mm WTB crimp terminals (Molex part 50212-8100) to the ends of your tamper
detector's two-wire connector cable.
b.
Insert the crimped terminal sockets into the Molex connector housing.
3.
Plug the newly-fitted connector cable into the PCIe adapter's tamper input header.
The external tamper detector must provide the following conditions:
>
In the
untampered
condition, the device must provide a low-impedance path (short circuit) between the
tamper-detection posts.
>
In the
tampered
condition, the device must show an open circuit.
The Battery
The adapter is fitted with a backup battery, which maintains cryptographic keys and the correct time when the
host computer is shut down, or when the adapter is otherwise disconnected from a power source.
The battery has an expected lifetime of ten years. It should not require replacement within the normal lifetime
of the adapter.
Thales ProtectServer HSM 5.9.1 ProtectServer HSM and ProtectToolkit Installation and Configuration Guide
2021-11-02 08:51:40-04:00 Copyright 2009-2021 Thales Group
17