Textron Bell 206A Series, Руководство по обслуживанию

Страница: 129 / 234

BHT-206A/B-SERIES-MM-1
5-00-00
30 APR 2013 Rev. 14 Page 99 Export Classification C, ECCN EAR99
Chapter 25 and
Chapter 53 9. Remove pilot and copilot seat cushions and panels and
examine the following:
Chapter 67 and
Chapter 76 a. Control tubes, N
1
throttle cable, bellcranks, levers,
yokes, and supports for bending, excessive looseness, and
security of attachment.
Applicable Service
Instruction b. Heater ducts for chafing with controls, if installed.
Chapter 95 c. Oil lines for leakage and general condition.
Chapter 96 d. Wiring and electrical components for condition and
security.
Chapter 53 e. Structure for corrosion, cracks, and condition.
CONTROLS
Chapter 67 1. Verify minimum friction of collective control and readjust as
required. Verify minimum friction of copilot collective control
stick, if installed.
2. Verify minimum friction of cyclic control and readjust as
required. Verify minimum friction of copilot cyclic control stick, if
installed.
3. Verify minimum friction of anti-torque control pedals and
readjust as required. Verify minimum friction of copilot
anti-torque control pedals, if installed.
Chapter 96 ELECTRICAL
1. Remove battery and recondition in accordance with
BHT-ALL-SPM and manufacturer’s service manual.
FUSELAGE
Chapter 52 1. Inspect latches on crew doors for correct adjustment.
2. Inspect latches on passenger doors, and baggage door for
correct adjustment.
SCHEDULED INSPECTIONS
5-29. 300-HOUR INSPECTION (CONT)
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER