66
Example
Math
Source 2
Source 1
Position and
Unit
To move the math waveform vertically,
press the
Position
key from the side
menu and use the Variable knob to set
the position.
Range
–12.00 Div ~ +12.00 Div
To change the unit/div settings, press
Unit/div
, then use the Variable knob to
change the unit/div.
The units that are displayed depend
on which operator has been selected,
and whether the probe for the
selected channel has been set to
voltage or current.
Operator:
Unit/div:
Multiplication
Division
Addition/Subtraction
VV, AA or W
V/V, A/A
V or A
Turn Off Math
To turn off the Math result from the
display, press the
Math
key again.
M
MATH
3-4-3. FFT
Panel Operation 1. Press the
Math
key.
M
MATH
2. Press
FFT
from the bottom menu.
3. Select the
Source
from the side
menu.
Range
CH1~4, Ref~4, f(x)*
*the f(x) source is set in the advanced math
function, page 69.
