44
3. MEASUREMENT
3-1. Basic Measurement
This section describes the basic operations required in capturing
and viewing the input signal. For more detailed operations, see the
following chapters.
•
Cursor
Measurement → from page 59
•
Configuration → from page 70
Before operating the oscilloscope, please see the Getting Started.
3-1-1. Channel Activation
Activate
Channel
To activate an input channel,
press a
channel
key.
When activated, the channel
key will light up. The
corresponding channel menu
will also appear.
CH1
CH1
Each channel is associated with the color shown
beside the VOLTS/DIV dial: CH1: yellow, CH2:
blue, CH3: pink and CH4: green.
When a channel is activated, it is shown above the
bottom menu system.
CH1
CH3
CH2
CH4
De-activate
Channel
To de-activate a channel, press
the corresponding
channel
key
again. If the channel menu is
not open, press the
channel
key twice (the first press shows
the Channel menu).
CH1
CH1
Default Setup
To activate the default state,
press
Default
.
Default
