91
4-5. Vertical View (Channel)
This section describes how to set the vertical scale, position, and
coupling mode.
4-5-1. Move Waveform Position Vertically
Panel Operation 1. To move the waveform up or down,
turn the
vertical position
knob for
each channel.
POSITION
2. As the waveform moves, the vertical position of
the cursor appears at the bottom half of the
display.
View or Reset
Vertical Position
1. Press a channel key. The vertical
position is shown in the
Position /
Set to 0
soft key
.
2. To change the position, press
Position / Set to 0
to reset the
vertical position or turn the
vertical
position
knob to the desired level.
CH1
Run/Stop Mode The waveform can be moved vertically in both Run
and Stop mode.
4-5-2. Select Vertical Scale
Panel Operation To change the vertical scale, turn the
VOLTS/DIV knob; left (down) or right
(up).
VOLTS/DIV
The vertical scale indicator on the
bottom left of the display changes
accordingly for the specific channel.
Range
1mV/div ~ 10V/d
iv (1MΩ). 1-2-5
increments
Stop Mode
In Stop mode, the vertical scale setting can be
changed.
4-5-3. Select Coupling Mode
Panel Operation 1. Press a
channel
key.
CH1
