7 Steps to Operation
8
P5000HX(-M)-WMB Series Motherboard
Service Manual
Overview
Before you connect any devices to the P5000HX(-M)-WMB or modify any settings,
install the motherboard into a chassis (
Figure 3
).
Procedure
The procedure for installing the motherboard is outlined in the following table:
Step 1: Install the Motherboard
Step
Action
1
Power-off the system and disconnect all power cords.
Note: Use a grounding wrist strap or other static-dissipating device when
accessing and handling the equipment.
2
Remove the chassis cover.
3
Detach the chassis stiffener bar (if required). This bar supports the frame of the
chassis.
4
Insert the motherboard into the chassis with the expansion slots oriented
toward the chassis I/O Slots and the power input headers toward the chassis
power supply.
5
Seat the motherboard on the mounting posts in the bottom of the chassis.
6
Secure the motherboard to the mounting braces by fastening screws through
the mounting holes on the motherboard.
7
Replace the chassis stiffener bar (if required).
To install the motherboard in a chassis not manufactured by Texas Micro,
consult the instructions provided by the manufacturer.
The CPU requires a minimum airflow of 200 linear feet per minute (LFM)
unimpeded across the processor within 0 to 55 °C (32 to 131 °F) ambient
temperature. Operations outside these specifications could void the warranty.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com