background image

 

EVAL-AD7761FMCZ User Guide 

UG-949 

One

 Technology Way • P.O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel: 781.329.4700 • Fax: 781.461.3113 • www.analog.com 

 

Evaluation Board for the 

AD7761

 16-Bit, 8-Channel, Simultaneous Sampling, 

256 kSPS, Sigma-Delta ADC with Power Scaling 

 

 
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT  
WARNING AND LEGAL TERMS AND CONDITIONS.

 

Rev. 0 | Page 1 of 17 

FEATURES 

Full featured evaluation board for the 

AD7761

 

PC control in conjunction with the SDP-H1 

system demonstration platform (

EVAL-SDP-CH1Z

PC software control and data analysis  
Time and frequency domain 
Standalone hardware capability 

ONLINE RESOURCES 

Evaluation kit contents 

EVAL-AD7761FMCZ

 evaluation board  

Evaluation software CD for the 

AD7761

 

Documents needed 

AD7761

 data sheet 

EVAL-AD7761FMCZ

 user guide 

Required software 

AD7761

 evaluation software 

EQUIPMENT NEEDED 

EVAL-AD7761FMCZ

 evaluation board 

EVAL-SDP-CH1Z

 system demonstration platform 

External 7 V to 9 V bench top power supply 
DC/ac signal source (Audio Precision® or similar high 

performance signal source) 

USB cable 
PC running Windows with USB 2.0 port 

GENERAL DESCRIPTION 

The 

EVAL-AD7761FMCZ

 evaluation kit features the 

AD7761

 

16-bit, 256 kSPS, analog-to-digital converter (ADC). A 7 V to 
9 V external bench top supply is regulated to 5 V and 3.3 V to 
supply the 

AD7761

 and support components. The 

EVAL-

AD7761FMCZ

 board connects to the USB port of the PC via 

a connection to the 

EVAL-SDP-CH1Z

 motherboard.  

The 

AD7761

 evaluation software fully configures the 

AD7761

 

device register functionality and provides dc and ac time 
domain analysis in the form of waveform graphs, histograms, 
and associated noise analysis for ADC performance evaluation. 
The 

EVAL-AD7761FMCZ

 is an evaluation board that allows the 

user to evaluate the features of the ADC. The user PC software 
executable controls the 

AD7761

 over a USB cable through the 

EVAL-SDP-CH1Z

 system demonstration platform (SDP). 

Full specifications for the 

AD7761

 are available in the product 

data sheet, which should be consulted in conjunction with this 
user guide when working with the evaluation board. 
 
 
 
 

 

Downloaded from

Arrow.com.

Summary of Contents for EVAL-AD7761FMCZ


















Reviews: