24
TI-Innovator™ Breadboard Pack
The breadboard and its components (purchased separately) let you build breadboard
projects and connect them to the TI-Innovator™ Hub through its Breadboard Connector
pins.
The breadboard components include:
•
A breadboard and jumper cables for creating electrical connections.
•
Addressable components, such as LEDs and sensors, that respond to Hub
commands. These are listed in the table below.
•
Passive components, such as resistors, capacitors, and manual switches that are
not directly addressable by the Hub but are required in many breadboard projects.
•
A Battery Holder that holds four AA batteries. Batteries are not included.
Addressable Components
Component
Image
Used with
pins
Description
Red LEDs
BB 1-10
Light-emitting diode
that emits light when
current passes through
it.
Green LEDs
BB 1-10
Light-emitting diode
that emits light when
current passes through
it.
RGB (Red-
Green-Blue)
LEDs
BB 8-10
Light-emitting diode
with independently
adjustable red, green
and blue elements. Can
produce a wide variety
of colors.
Thermistor
BB 5,6,7
(analog
input
required)
Resistor whose
resistance changes
based on temperature.
Used for measurement
and control.
7-segment
Display
BB 1-10
Array of LEDs arranged
to display numbers and
some alphabetic
characters. Also has an
LED for a decimal point.
Small DC
Motor
BB 1-10
(uses
digital to
Motor that converts
direct current electrical
power into mechanical
