To Store the Program:
You must store your program before you can run it.
▶
On the handheld, press
b
and select
Check Syntax & Store > Check Syntax &
Store
.
On the Program Editor menu, click
Check Syntax & Store > Check Syntax & Store
.
To Close the Program Editor
▶
On the handheld, press
b
and select
Actions > Close
.
On the Program Editor menu, click
Actions > Close
.
If you have made changes since storing the program, you are prompted to Check
Syntax & Store.
To Run the Program:
1. Ensure that the TI-Innovator™ Hub is connected to your handheld or computer.
2. Ensure that any needed I/O Modules or Breadboard components are connected to
the Hub.
3. Open the document that contains the program.
4. On a Calculator page, type the program name and parentheses. If the program
requires arguments, enclose them in the parentheses, separated by commas.
The program runs.
To Edit an Existing Program:
1. If necessary, open the document that contains the program.
2. Go to a Calculator page.
3. On the handheld, press
b
and select
Functions & Programs > Program Editor >
Open
.
On the Calculator menu, click
Functions & Programs > Program Editor > Open
.
4. Select the program name name from the displayed list.
The program appears in a Program Editor page.
Using the Hub Menu to Build Commands
The Hub menu is available on the TI-Nspire™ CX technology anytime you are creating or
editing a program. It can save you time building commands and help you with correct
command spelling and syntax.
Note:
To build a command from the Hub menu, you need to know:
•
The unique name of the component that you are addressing, such as "SOUND" for
the on-board speaker.
•
The command parameters that apply to the component, such as sound frequency
and duration. Some parameters are optional, and you might need to know the
value range of a parameter.
17
