To Close the Program Editor
▶
Press
y 5
to return to the Home Screen.
The program remains available through the
¼
key.
To Run the Program:
1. Ensure that the TI-Innovator™ Hub is connected to your calculator.
2. Ensure that any needed I/O Modules or Breadboard components are connected to
the Hub.
3. From the Home Screen, press
¼
, select your program name from the displayed
list, and press
Í
.
The program name is pasted to the Home Screen.
4. Press
Í
again to run the program.
To Edit an Existing Program:
1. On the Home Screen, press
¼
, select
Edit
.
2. Select the program name from the displayed list, and press
Í
.
The program opens in the Program Editor.
Using the Hub Menu to Build Commands
The Hub menu is available on the TI CE graphing calculator anytime you are creating or
editing a program. It can save you time building commands and help you with correct
command spelling and syntax.
Note:
To build a command from the Hub menu, you need to know:
•
The unique name of the component that you are addressing, such as "SOUND" for
the on-board speaker.
•
The command parameters that apply to the component, such as sound frequency
and duration. Some parameters are optional, and you might need to know the
value range of a parameter.
Example of Using the Hub Menu:
This TI CE graphing calculator example builds the command
Send
("SET SOUND 440 TIME 2")
to sound a 440Hz tone for 2 seconds on the on-board
speaker.
9
