4
Note:
Some peripherals, such as motors, may require auxiliary power. For more
information, see Using an Auxiliary Power Source (page 27).
Connecting to a Graphing Calculator
1. Identify the "
B
" connector on the USB Unit-to-Unit (Mini-A
to Mini-B) cable. Each end of this cable is embossed with
a letter.
2. Insert the "
B
" connector into the
DATA
port at the bottom
of the TI-Innovator™ Hub.
3. Insert the free end of the cable (the "
A
" connector) into the USB port on the
calculator.
Hub connected to
TI CE Graphing Calculator
Hub connected to
TI-Nspire™ CX Handheld
4. Turn on the calculator if it is not already on.
The power LED on the Hub glows green to show that it is receiving power.
