40
General Precautions
•
For best performance, use Rover on a hard surface. Carpet may cause the Rover
wheels to catch or drag.
•
Do not turn the Holder pegs on the Calculator Platform without lifting them first.
They could break.
•
Do not use the marker as a lever to pull or push the Rover.
•
Do not unscrew the case enclosure on the bottom of the Rover. Encoders have
sharp edges that should not be exposed.
•
Do not move Rover after executing a program. The internal gyroscope may
unintentionally try to get the Rover back on track using the initial location.
•
When inserting the Breadboard Ribbon Cable into the Hub Breadboard Connector, it
is critical that you insert the cable correctly. Make sure the red (dark) wire pin is
inserted into the 5v hole on the Hub's Breadboard Connector.
Caution:
If you dislodge or disconnect any of the cables, use this image as a reference
for correct hookups.Reference to Bottom View
