Reprogramming the DLP NIRscan EVM Application Software
38
DLPU016C – April 2014 – Revised April 2019
Copyright © 2014–2019, Texas Instruments Incorporated
NIRscan EVM Reprogramming Procedure
Figure C-2. Boot Switch Location
4. Continue to hold down S2 until any on-board LED lights up (about 1 second) - then release S2.
5. One or both of two blue LEDs (D1 and D2) as shown in
, flash on and off erratically. This
behavior indicates the eMMC is being programmed.