35
DLPU016C – April 2014 – Revised April 2019
Copyright © 2014–2019, Texas Instruments Incorporated
Power Supply Requirements
Appendix B
DLPU016C – April 2014 – Revised April 2019
Power Supply Requirements
B.1
External Power Supply Requirements
The DLP NIRscan EVM does not include a power supply. The external power supply requirements are:
•
Nominal voltage: 12 V DC –5% / +10%
•
Minimum current: 3 A
•
Maximum current: 5 A
•
DC connector size:
–
Inner diameter: 2.5 mm
–
Outer diameter: 5.5 mm
–
Shaft: 9.5 mm female, center positive
•
Efficiency level: V
•
A recommended power supply is Digi-Key
, or equivalent.
NOTE:
External Power Supply Regulatory Compliance Certifications: Recommend selection and use
of an external power supply, which meets TI’s required minimum electrical ratings in addition
to complying with applicable regional product regulatory and safety certification requirements
such as (by example) UL, CSA, VDE, CCC, PSE, and so forth.
