attachment point to ASTM F887-16.
Use as a restraint system according to
EN358 on working platforms only. (The
user must not reach a point where a
free fall is possible.) Attach the work
positioning lanyard to the central rear
attachment ring (15). The anchor point
must be above waistline level. (pic. 10)
Use as Sit Harness on the basis of
EN 813:
– Suspended – central attachment on
rope bridge (10). Doubled (running)
rope system with friction hitch adjuster.
– Suspended – central attachment on
rope bridge (10). Single rope de-
scent with mechanical adjuster.
– Suspended – Attachment to both
front D rings (8). Doubled (running)
rope system with friction hitch adjuster.
pic. 11
pic. 12
pic. 13
4. REPLACEMENT PARTS
Product specific instructions are in
-
cluded with every replacement part.
– Hip-Front D Replacement Kit
7333208
– Leg Loops right: 7350152 / left:
7350151
– Replacement Leg Padding (1 pair)
7333209
– Comfort Back Padding 7359960
– Gear Loops for treeMOTION evo
7333213
– Standard Back Padding 7333214
– Upper Assembly treeMOTION evo
7333211
– Sliding T ring for rope bridge
6121515
Shoulder straps and load bearing
assembly
(Part no. 7333211)
Upper harness (shoulder straps and
load carrying assembly) are non-PPE
elements and not intended for fall ar-
rest. No fall- arrest harness!
pic. 14
Replacement rope bridge
treeMOTION evo was certified to
be used with different bridges that
support the front rope bridge attach-
ment point (10). Depending on the
11
Use