16
• Impaq
®
300 Blu-ray
“ Parental control” menu
This menu item offers a child lock for BD/DVD
playback. Some BD/DVDs are labelled for
specifi c age groups and cannot be played in a certain
setting. Unfortunately, many BD/DVDs do not have
proper protection and many self-burned copies and video
movies also lack such protection.
A parent password is requested in order to open the
menu. The factory default is “0 0 0 0”. Therefore, push the
zero button four times and confi rm by pushing the OK
button under the password entry.
“Child lock”
On
– Parental control is activated.
Off
– Parental control is deactivated. Entry of the pass-
word is required for this.
“Age rating”
Set the protection level. Eight levels can be chosen from,
which correspond to the recommendations of the MPAA
(Motion Picture Association of America) for rating fi lms:
1 [of no concern for a child audience]
2 – G
(General Audience), suitable for all age groups
3 – PG
(Parental Guidance), under adult supervision
4 – PG-13
(Parental Guidance 13), for at least 13 years of
age and under adult supervision
5 [PG-R]
(Parents Guidance - Restricted), only under adult
supervision
6 [R]
(Restricted), 17 years and older under adult supervi-
sion
7 [NC-17]
(No Children 17 and under admitted), 18 and
over
7 [Adults]
“Parental password”
Change the password: Enter the new password with the
number buttons “1...0” and confi rm with the enter button
41
.
Remember the new password! In an emergency, you can
reset the receiver to the factory default (see next section).
“ System” menu
Here you can defi ne the general settings for
the receiver.
“ BD-Live”
Check if the Blu-ray disc is connected with the Internet.
Activate:
The BD can access the Internet at any time.
Deactivate:
The BD cannot load any data from the Inter-
net
.
“ Screensaver duration”
After the period of inactivity which can be set here, the
receiver will dim the screen e.g. to prevent burn-in
with plasma screens.
Possible values: 20, 30 minutes. “Off” means that the
screensaver is deactivated.
“Automatic deactivation”
After a period of inactivity which can be set here, the
receiver will automatically turn off.
Possible values: “Off”, 20, 30 minutes. “Off” means that
the shut-off function is deactivated.
“ Network update”
With this function (if available), you can load a new ver-
sion of the operating system software for your receiver
via your Internet connection.
First, the current version installed and the update version
appear on the screen. With the navigation buttons
56
“
Ï
” and
40
“
Å
” select the item “OK” in order to perform
the update or “Cancel” to abort the process. Then push
the enter button
41
.
The update will take several minutes, during which time
you may not deactivate the device and disconnect the
Internet connection. Be sure to observe the instructions on
the screen in the process.
“Restore factory default”
This resets all receiver settings to the factory default. You
will have to set your individual settings again afterwards.
„DivX® VOD“
Here you can fi nd the DivX® VOD Registration Code
of your Impaq® 300 Blu-ray. Using this code, you can
register your device in order to play copyright and copy
protection secured DivX® videos. Learn more about it on
the website www.divx.com.
91768 GB 20120611.indd 16
91768 GB 20120611.indd 16
11.06.12 09:41
11.06.12 09:41
