User's Guide
TESTEC High Voltage Probe TT-HVP 15HF
This high voltage probe is designed to prevent accidental shock to the operator when properly used.
This operating note must be read and understood prior to using the probe. Improper procedures or
incorrect analysis of the measurement situation can result in serious shock.
General Information
The Testec High Voltage Divider Probe is an accessory to be used with analog or digital oscilloscopes
having input resistance of 1 M
Ω
(
±
1 %) and nominal input capacitance between 15 and 30 pF. The
1000:1 divider extends the voltage measurement capability to 15 kV dc or 10 kV rms ac (30 kV peak).
Specifications
Maximum Input Voltage
Temperature Coefficient
DC Voltage: 15 kV
Less than 200ppm/°C
AC Voltage: 10 kV RMS
PEAK Voltage: 30 kV
Compensation Range
Accuracy
For input capacitance
DC Volts:
±
6%
of 15 pF to 30 pF
AC Volts:
±
6%
Bandwidth
Measurement Category I
50 MHz (
±
3 dB)
(
CAT I)
Other Characteristics
Input Resistance
Operating Temperature
100 M
Ω
, 1 pF
0 °C to +50 °C
Cable Length
Storage Temperature
2 meter
-20 °C to +70 °C
Altitude
Humidity
Up to 4,600 meters (15.000 ft)
Up to 80 % relative humidity at +40 °C
Specifications are subject to change without notice
Warning
