Tescom TMV3000SEA, Инструкция по эксплуатации

Страница: 31 / 40

30 30
Response Cause
Display
number
2
Turn the power switch OFF, and pull out the power plug from the outlet.
3
Remove the bottle set/tumbler set from the main body.
4
Check the following causes and respond accordingly.
*If the appliance still cannot be fixed, ask for help at the store.
About error notification
●
Clean the cover, and if the ingredients
are frothing, remove the froth.
Froth has entered the float section of
the vacuum processing bottle cover.
E31
●
Allow 30 minutes or more of downtime.
* Please adhere to the runtime limitations.
The runtime limitation has
passed, and the appliance was
used continuously for an
extended period of time.
E41
10 minutes have passed since
operation has been temporarily
stopped.
E34
●
Stop use immediately, turn off the
power, and wait until the bottle cools.
The appliance is heating while
empty.
E50
•
E52
●
Stop use immediately. If the burnt
ingredients in the bottle cannot be
washed away, ask for help at the store.
The contents of the bottle are
burning.
●
Clean the cover and the suction port
of the main body.
Froth or ingredients have been
sucked into the main body.
(This may cause damage.)
E32
●
Move the contents of the bottle to
another container, and
-remove any ingredients that cannot be used.
-decrease the amount of ingredients to
below capacity.
-cut the ingredients into smaller pieces.
-add water or other liquids.
The appliance is having
difficulty stirring, whether from
ingredients that are too hard,
too many, or too large, or from
too little water.
E33
●
Move the contents of the bottle to
another container, and remove the
ingredients that are caught on the cutter.
●
Operation will be reset, so please
start over.
Ingredients are caught on the
cutter.