Tescom TMV3000SEA, Инструкция по эксплуатации

Страница: 33 / 40

32
Align
●
REMOVE
●
ATTACH
Arm cover
Arm cover
Vacuum arm
Arm cover
Tumbler base
REMOVE
Turn
Turn
ATTACH
Squeeze out a soft cloth soaked in soapy water or a neutral
detergent diluted with water and wipe down the main body.
Wipe down the suction port with a well-squeezed
damp cloth, without using detergent.
The arm cover may be removed and washed with water when there is an Ingredient
Error and it is suspected that ingredients were suctioned, or when soiling is a concern.
Avoid water exposure
Please be careful not to get the main body wet because it
cannot be washed with water. Otherwise, failure may occur.
Maintenance procedures for the main body
Caution
Do not pull and remove the suction port.
After cleaning, attach to the main body
after absorbing any moisture well and allowing to dry completely.
Turn until the
positions are aligned.
Align and attach the protruding part of the vacuum arm and the groove of the arm cover,
and turn and attach in the direction shown by the arrow in the diagram.
If it is difficult to turn,
use the tumbler base.
* Ensure that no fibers from
the cloth are left behind.
(1) Attach the protruding part of the tumbler
base to the groove in the arm cover.
(2) Remove by rotating in the direction
of the arrow in the illustration.
Maintenance