Tescom TMV3000SEA, Инструкция по эксплуатации

Страница: 30 / 40

29
Response Cause
Display
number
(1)
Check number
(2)
Press
One lamp is blinking.
Bottle
mounting
error Unable to
create a
vacuum Unable to
process Temperature
abnormality
About error notification
1
Check the number displayed, then press the Cancel/Release button to cancel.
(When it cannot be cancelled, turn the power switch to OFF.
●
Do not move the main body or bottle
during processing.
*This may cause burning or damage.
The vacuum arm or vacuum
processing bottle was removed
during vacuum processing.
●
Do not fold down the vacuum arm
when using the vacuum function.
●
Fold down the vacuum arm when
mounting the heat processing bottle.
●
Place the cover.
●
Mount the cover such that the flat side
is facing the vacuum arm side.
●
Firmly attach the cover so that there
are no openings.
●
Correctly assemble the cover.
The heat processing bottle cover
was removed during processing.
The heat processing bottle has
been mounted without folding
down the vacuum arm.
The cover is off.
The vacuum processing bottle
has been mounted with the
vacuum arm folded down.
●
Reset the orientation of the bottle
following the procedure 3 on p. 12.
The vacuum processing bottle
has been mounted facing the
wrong direction.
The cover is not firmly attached.
The cover has not been
assembled correctly.
E21
E22
E11
E23
E24
If a different error number is displayed from the ones listed here,
stop use immediately and ask for help at the store.
The heat processing bottle cover
is on backwards.