background image

37

When

Handling method

Probable causes

Troubleshooting

Check the following items, and if the appliance is still in a bad condition, stop use 

immediately and ask for help at the store. 

Even if you push the button, 
the product doesn’t operate.
The product has stopped operation.
 (The error notification lamp illuminates.)

Address the issue by following the 

procedures on pp. 29-30.
If these measures do not work and 
the error continues, stop use 
immediately and ask for help at the 
store.

Smoke appears.
The cord has twisted and won’t go back to its 
original state.

Stop use immediately and ask for 

help at the store.

You cannot turn 
the power ON. 

Please re-insert the power plug 

into the outlet.

The power plug has been 

mistakenly pulled out from the 
outlet.

Vacuum processing 
cannot be done.
(The smoothie course 
or frozen course 
cannot be selected.)

Processing using the manual course 

or pulse button. (Because the inside 
of the bottle has not been made into 
a vacuum, the contents will become 
a smoothie made with air.)

Temporarily remove the bottle from 

the main body, and reset the cover 
after cleaning it.

Vacuum processing was attempted 

after processing or after processing 
suspension.
To prevent damage, vacuum 
processing cannot be done in the 
following circumstances.

• After the pulse button has been 

pressed and the ingredients have 
been stirred.

• When processing has been 

suspended by pressing the 
Cancel/Release button after stirring 
has started.

• After removing the vacuum arm 

when vacuum processing has been 
completed.

In order to download this user manual, please visit the TESCOM website below.

http://www.tescom-japan.co.jp/global/

Содержание TMV3000SEA









































Отзывы: