Tescom TMV3000SEA, Инструкция по эксплуатации

Страница: 14 / 40

13
Turn to change
Press to select
5
Select a course and process.
Course
Smoothie course
Frozen course
Manual course
(1) Turn the dial to switch on the or lamp
for the course you will use.
1.Turn the dial to switch on the , and press
the center of the dial to select.
(blinking light will change to a steady light)
2.Turn the dial to select the item to set,
and press the center of the dial to decide.
(Changes in order from stirring time to rotation speed.)
3.Change the numbers of the display window by turning
the dial, and press the center of the dial to select.
4.Press the Start/Stop button to process.
*Turn the dial during processing to change the rotation speed.
: Stirring time can be set in 10-second units from
10 to 120 seconds. (Not including rest time.)
: Rotation speed can be set from 1 (low speed) to
10 (high speed).
(2) Press the Start/Stop button to process.
Operation procedures
Approximate
rotation speed settings
Volume
in use
Rotation
speed
500-1000ml:
1000-1500ml:
1500-2000ml:
3-6
4-7
5-10
* If the rotation speed
is too high for the
ingredients, they
may scatter and stick
to the bottle.
The lamp
for the set
item will be a
steady light
If the appliance makes a double-beat alarm sound, the error lamp is lit,
and operation stops, see pp. 29-30 for handling instructions.
Using the vacuum processing function
·
After the air has been removed from inside the bottle, the appliance will stir until the timer reaches 0,
and stop automatically.
(Regular rest periods are included during stirring.)
·
Press the Start/Stop button to temporarily stop or restart while processing.
*The appliance cannot be temporarily stopped until the cutter begins turning.
If the appliance has been temporarily stopped for five minutes, you will be notified with a beeping sound.
If another five minutes pass without restarting, the appliance will be in error and will stop operating.
·
Press the Cancel/Release button to complete operation during processing.
Operation will stop, and the vacuum arm will be disconnected.