Terumo BCT T-SEAL MOBILE, Инструкция по эксплуатации

Страница: 10 / 28

10
INSTALLATION
5 INSTALLATION
This chapter involves unpacking, temperature requirements and installation of the
instrument.
5.1 Unpacking and Inspection
1. Visually inspect the cardboard box for damage. Report any damage immediately.
2. Lift the instrument out of the cardboard box and place it on a flat surface.
The instrument is shipped in one cardboard box that includes:
I. 1 Hand unit
II. 1 Battery unit
III. 1 Battery charger without plug
IV. 1 IFU (English)
V. 1 Kit Primary Adaptors
3. The above list is subject to change, refer to the packing list for accurate description of
contents. If any parts are missing or if the parts are damaged, report it immediately.
4. Please keep all shipping and packaging materials, as they may be required for later
transportation, at least during the warranty time.
5.2 Environmental Requirements
To keep the instrument operating at its best, please observe the following:
•
The instrument should be placed on a flat surface free from dust, solvents and acidic
vapor.
•
Use the instrument in an area free from vibration and with a room temperature of 15 -
35°C (60 - 95°F), and relative humidity 10% - 90%.
•
Handle the components with care in a clean environment.