MERIDIAN SERIES
®
HEA
TED REACH INS
Project __________________________
Item____________________________
Quantity _________________________
CSI Section 11400
980 S. Isabella Road
Mt. Pleasant, MI 48858
www.delfield.com
Phone: 800-733-8948
Fax: 800-669-0619
Email: [email protected]
Approval _________________
Date____________________
SPECIFICATIONS
Exterior:
Cabinet front, and shroud shall be
22-gauge stainless steel. Exterior sides shall
be aluminum. Facing of shroud shall be easily
removable without the use of tools.
Cabinet interior shall be anodized aluminum. Bottom
& top of liner shall be die-stamped to provide
radius corners and a recessed bottom. Base shall be
fully insulated with high-density foamed in place
polyurethane.
Interior shall have three wire shelves per door section.
Shelf support pilasters shall be heavy-duty with
shelves adjustable at 1.0” (2.5 cm) increments. Units
are mounted on 6” (15.24 cm) metal legs.
Doors:
Solid doors shall have a 22-gauge stainless
steel exterior & anodized aluminum interior liner.
Doors shall be fully insulated with high density
foamed in place polyurethane. Each door shall have
two self-closing, cam-lift style hinges. Doors shall be
easily removable without use of tools. Door gaskets
shall be magnetic snap-in style to allow simple
replacement. Door handles shall be recessed.
• Please specify right or left hand hinging at time of
order.
Glass doors shall be constructed with extruded
aluminum frames and shall utilize insulated double-
pane construction. Glass doors shall be provided with
self-closing, cam-lift style hinges, and shall be easily
removable without the use of tools.
Dual Voltage Models Only:
Electrical connections
shall be 115/208-240 volt, 60 hertz, single phase,
and must be hard-wired to the junction box located on
top of the unit.
Heating Assembly:
Cabinets to be designed to
maintain temperature up to 200ºF. Helical shaped,
tubular finned strip heating elements. High speed blower
to provide uniform airflow in cabinet. Removable/
replaceable heating system. No exposed elements inside
cabinet. Fan and heating elements service accessible
without tools. Temperature to be controlled by an
adjustable electronic thermostat equipped with an analog
display. On/off switch in front.
MODELS:
MHR1-S
Single section
MHR2-S
Two section
MHR1-SH
Single section
Full height solid door
Full height solid doors
Half height solid door
MHR1-G
Single section
MHR2-G
Two section
MHR2-SH
Two section
Full height glass door
Full height glass doors
Half height solid doors
MHR1-GH
Single section
MHR1-GH
Two section
Half-height glass door
Half height glass doors
CSI Section 11400
MERIDIAN SERIES
®
Heated Reach Ins
MHR2-GHSH
STANDARD FEATURES
• Shroud removes without tools, for easy condenser
maintenance
• Built in door locks
• Durable stainless steel doors and shroud, for lasting good
looks
• New high-density foam insulation cuts energy costs
• Big, easy grip handles are easy to find, don’t intrude into
kitchen traffic
• Attractive aluminum side panels are easy to clean and
corrosion resistant
• Heavy-duty hinges with stay open feature
• Refrigeration system is located outside the food zone, more
space for product storage
• Mini watt door heaters eliminate condensation with
minimal energy cost
• Easy to read dial thermometer
• Tri seal door gaskets lower energy costs with a unique
insulating design
• Chrome shelves
• Aluminum interior stands up to food acids without
corroding
• Lots of interior storage space for the money
• Rugged metal legs, adjustable to compensate for
uneven floors
OPTIONS AND ACCESSORIES
Stainless steel exterior sides
Stainless steel interior
Stainless steel kick plate
Door and end laminate
Stainless steel exterior back
Digital thermometer
TXV
Chrome Shelves
Tray Slides
220/50/1 electrical
Electronic control
Stainless steel legs
Casters
