Terumo BCT T-SEAL MOBILE, Инструкция по эксплуатации

Страница: 7 / 28

7
SPECIFICATIONS, PARTS AND ACCESSORIES
4 SPECIFICATIONS, PARTS AND ACCESSORIES
4.1 Specifications
The table below lists the physical specifications.
Terumo BCT code ............... T5460
T-SEAL MOBILE, a complete sealing system, which includes
Battery unit, Hand unit, Charger and IFU.
Type of PVC (EVA) tube ..... Different types and sizes of tubes up to 6.2 mm (5.4 mm)
outer diameter can be sealed due to a sophisticated sensing
system, which automatically adapts sealing time.
Sealing capacity ................... Approximately 1500 seals/charge with PVC tubes up to 5 mm
outer diameter at 20 °C (68 °F)
Continuous seal capacity ... 50
Mode of operation ............... Operation: 25%, Intermittent: 75%
Sealing time .......................... 0.4 up to 3 sec. depending on tubing
Intended Use ........................ The T-SEAL MOBILE is an automatic system for sealing PVC
and EVA tubes connected to blood bags included either in
Blood Packs or in Apheresis Disposable Sets. The sealing can
be performed when the donor is still connected to the Blood
Pack or the Apheresis Disposable Set.
Input Power .......................... Charger 110-240 V~ / 50/60 Hz
Battery 29.6 VDC, 1.5 Ah, Li-Ion Mangan
Consumption ........................ Charger: 30 W, Sealer: 150 W max
Fuses ..................................... Charger: T2 A 250 V (internal)
Battery: 2 A (input) / 10 A (output) (internal)
RF Output .............................. 80 W max. / 50
Ω
/ 40.680 MHz
Size (W x H x D) Battery unit 165 x 106 x 32 mm (6.5 x 4.2 x 1.2 in)
Weight kg (Ib) ....................... Battery unit: 0.68 kg (1.50 lb)
Hand unit: 0.39 kg (0.86 lb)
Temperature ......................... Operating: 15 to 35 °C (60 - 95 °F)
Storage: - 20 up to + 70 °C (- 4 up to 158 °F)
Humidity ................................. Operating: 10 up to 90% Rh (non condensing)
Storage: 10 up to 90% Rh (non condensing)
Altitude ................................... Operating: maximum 3000 meters (9842 feet)
In compliance with ............... EN 60601-1: 2006
General Reqirements for basic safety and essential
performance
EN 60601-1-2: 2007
Collateral standards for Electromagnetic Compatibility