Teracue DCH-510P, Руководство пользователя

Страница: 9 / 30

DCH-510P™
User Guide V1.1
9
3.5 Power on the Device
Be sure the device is mounted into the rack properly and firmly, and the signal cables are connected
well, then power can be applied to the device. The main socket and fuse are located at the rear panel
of the device.
When the device is powered on, verify that the display shows the following message:
Digital TV Processor (factory default unit-name)
IP: 10.10.60.148 (factory default IP Address for LAN access)
If no message is shown in the display or there is not light in the display, the device is defective and
has to be returned for servicing.
4. Navigating the Front Panel
POWER
Power indicator, green light means power is OK
TUNER LOCK Tuner lock indicator, green light means signal is locked; if there is no light,
which means no signal input or wrong parameters setting.
ALARM Alarm indicator
LCD 2 × 20 character LCD
Operation buttons [ ] [ ] [ ] [ ] [ENTER] [EXIT] buttons
[ ] [ ] are used to up/down pages of menu or increase/decrease value
when edit numbers
[ ]
[ ] are used to move cursor
[ENTER] is used to enter sub menu or confirm operation
[EXIT] is used to return previous menu or cancel operation
Common Interface PCMCIA Module slot
5. Menu Structure and Operating the Device
The menu structure of the device is showed in below figure. After initialization is completed, press
[ENTER] button to enter main menu:
(1) Input Setup Set input parameters
(2) Output Setup Set output parameters
(3) System
Set system parameters
Main Menu
Inputs
Outputs System
POWER TUNER LOCK ALARM LCD Operation Buttons Common Interface