Teracue DCH-510P, Руководство пользователя

Страница: 20 / 30

DCH-510P™
User Guide V1.1
20
5.3.4 Properties
Version:
show software version of this device
MAC Address: Factory-set MAC address which is guaranteed to be unique. You cannot
configure this address.
Linux OS version: show Linux OS version
ARM SW version: show ARM software version
Decoder version:
show Decoder version
FPGA version: show FPGA version
TS/IP IN (or OUT) NIOS:
it’s changed when TS/IP board is set to “IP Out” or “IP IN”.
TS/IP IN (or OUT) FPGA: it’s changed when TS/IP board is set to “IP Out” or “IP IN”.
5.3.5 Factory Setting
All the user configurable parameters will be set to the factory default settings, including IP address and
the unit name.
5.3.6 Optional Function
There are two submenus:
External Board Type:
Press
<ENTER>-ke
y to active the menu, use
< > < >-keys
to
configure the TS/IP portion as ‘IP in’ or ‘IP out’ or ‘No Exist’, and the option is exclusive. Press
<ENTER>-key to confirm or to scrap by pressing <EXIT>-key .
After the operation, you need to reboot the unit to valid the configuration.
IP in: The TS/IP port is configured as input, you can feed transport stream over
IP into the unit. The menu ‘Ethernet’ will be showed under the inputs
menu.
IP Out:
The TS/IP port is configured as output, you can set the transport stream
over IP output to the IP network. The menu ‘Ethernet’ will be shown under
the output menu.
No Exist:
The TS/IP port is invalid. Therefore the menu ‘Ethernet’ will not be shown
anywhere.
MUX Function:
Press <ENTER>-key to active the menu, use < > < >-keys
to configure the built-in MUX as ‘Enable’ or ‘Disable’. Press <ENTER>-key to confirm or to
scrap by pressing <EXIT>-key .
5.3.7 Machine Type
This setting is reserved for factory configuration only.