Teracue DCH-510P, Руководство пользователя

Страница: 13 / 30

DCH-510P™
User Guide V1.1
13
5.2.3 Decoder
You can configure the parameters of Video and Audio of the program decoded by AV decoder.
Status: OK or Alarms indicates the status of the decoder. You can use the
<ENTER>-key to check
detailed information.
Source: Press the
<ENTER>-key
and use the
< >
or
< >-key
to roll up or down to select the signal
source of ASI output, there are 5 types of signal source optional:
CI Decrypted: The decrypted transport stream from CI functional portion will be
delivered to the ASI output port on the back panel.
TUNER:
The transport stream from Tuner will be delivered to the ASI
output port on the back panel.
ASI1 Input: The transport stream comes from ASI1 input port will be
delivered to the ASI1 output port on the back panel.
ASI2 Input: The transport stream comes from ASI2 input port will be
delivered to the ASI2 output port on the back panel.
MUX TS: The transport stream comes from built-in MUX will be delivered
to the ASI output port on the back panel.
(The MUX TS is valid only when the built-in MUX function is
enabled and turned on. Refer to chapter 5.2.7 and chapter 5.3.6
for how to set the built-in MUX.)
Press
<ENTER>-key to save or press <EXIT>-key to scrap. A few seconds after the source being
selected, the TS will be delivered to the ASI output port on the back panel.
Program: under this sub menu, you will see all program names detected by DCH-510P™. The
programs could be coming from ASI input, Tuner, TS/IP input, the internal CI decryption portion, BISS
Decryption portion or MUX TS. Use the
< > or < >-key to roll up or down between the program
names, and use
< >
-and
< >-key
to switch among input sources, where a number in front of the
program name indicates the input source:
0-xxxxx:
Displays the program name, which comes from ASI input.
1-xxxxx:
Displays the program name, which comes from TUNER input.
2-xxxxx:
Displays the program name, which comes from TS/IP input
3-xxxxx: Displays the program name, which comes from the CI.
4-xxxxx: Displays the program name, which comes from ASI2 input.
5-xxxxx:
Displays the program name, which comes from BISS Decrypted input.
6-xxxxx:
Displays the program name, which comes from MUX TS.
A few seconds after the program being selected, the A/V signal will be delivered to the related
connectors on the back panel.