Teracue DCH-510P, Руководство пользователя

Страница: 10 / 30

DCH-510P™
User Guide V1.1
10
5.1 Input Menu
There are four options: Status, DVB-S2, RSSI and Ethernet (optional):
5.1.1 Status Menu
It contains four options, ASI1, ASI2, TUNER and IP IN, to show the status of signal input:
ASI1:
When signal from ASI1 input port is locked, it will display package format and code rate;
if signal is not locked, it will show Unlock.
ASI2: When signal from ASI2 input port is locked, it will display package format and code rate;
if signal is not locked, it will show Unlock.
TUNER:
When signal from tuner input port is locked, it will display package format and code
rate; if signal is not locked, it will show
Unlock.
IP IN: When signal from IP input port is locked, it will display package format and code rate; if
signal is not locked, it will show Unlock ( Note: this option only appears when the External
Function is set as “IP IN”. Please refer to chapter 5.3.6 for setting method).
5.1.2 DVB-S2 Menu
There are 6 options to set DVB-S2 parameters. After signal is locked, the TUNER LOCK indicator on
front panel will turn green.
LNB Frequency:
Input LNB frequency
Satellite Frequency: Input downstream frequency of satellite
Symbol Rate: Input symbol rate of satellite
LNB Voltage: select the correct LNB voltage output of the F-connector: Off, 13 V, 18 V. <A>
LNB 22KHz:
activate the LNB 22 kHz control signal to the LNB: On or Off. <B>
DISEQC: Can select OFF/Port A/Port B/Port C/Port D
Note:
Please contact the local satellite operator for the satellite frequency and symbol rate.
<A> Normally, 13V switches the LNB to receive Vertical/Left hand
polarization while 18V receive Horizontal/Right hand.
<B> Normally, 22KHz control signal switches the LNB to receive high
band if any.
5.1.3 RSSI
There are two options to show the quality of receiving DVB-S2 signal.
Inputs
Status
DVB-S2
Ethernet
RSSI