Teracue DCH-510P, Руководство пользователя

Страница: 19 / 30

DCH-510P™
User Guide V1.1
19
5.3 System Menu
There are seven sub-menus:
5.3.1 Local Setup
Each DCH-510P™ has an IP address, a network sub mask and a gateway. These must be set to an
appropriate value for the network over which the unit can be accessed by the remote control system
such as the HDMS.
IP Address:
set the IP address of the unit.
Network Mask: set the network mask for the subnet to which the unit is connected.
Gateway:
set the gateway for the network to which this unit is connected.
5.3.2 Trap IP Address
The DCH-510P™ provides a Monitor Center IP address. You can set this to be the same IP address
of the Monitor Center, which is typically a PC in order to allow the device to send messages to the
monitor center.
5.3.3 Unit Name
The DCH-510P™ allows you to edit the unit name which is displayed on the front panel LCD. Default
name is ‘Digital TV Processor”. The unit name should not be longer than 20 characters in ASCII
format.
System
Local
Setup
Properties
Factory
Setting
s
Optional
Function Machine
Type HTTP
Login Unit
Name Trap
IP