Teracom TCW122B-WD, Руководство пользователя

Страница: 12 / 16

TCW122B-WD_R2 ( Firmware version 2.xx ) Page 12
14.13 Setup -> watchdog1
OID Name Access Description Syntax
x .2.10.1.0 wdg1Mode read-write
Watchdog 1 Mode - Incomming or
Outgoing Ping INTEGER { disabled(0),
incomingPing(1), outgoingPing(2) }
x . 2.10.2.0 wdg1OutgoingPingInterval read-write Watchdog 1 Outgoing Ping Interval INTEGER { 1..253 }
x . 2.10.3.0 wdg1PingTimeOutForRestart read-write Watchdog 1 Ping Time out for restart INTEGER {2..65000}
x . 2.10.4.0 wdg1PingIPAddress read-write Watchdog 1 Ping IP address IpAddress
x .2.10.5.0 wdg1NumberOfRestarts read-write Watchdog 1 Max Number of restarts INTEGER (1..253)
14.14 Setup -> watchdog2
OID Name Access Description Syntax
x .2.11.1.0 wdg2Mode read-write
Watchdog 2 Mode - Incomming or
Outgoing Ping INTEGER { disabled(0),
incomingPing(1), outgoingPing(2) }
x . 2.11.2.0 wdg2OutgoingPingInterval read-write Watchdog 2 Outgoing Ping Interval INTEGER { 1..253 }
x . 2.11.3.0 wdg2PingTimeOutForRestart read-write Watchdog 2 Ping Time out for restart INTEGER {2..65000}
x . 2.11.4.0 wdg2PingIPAddress read-write Watchdog 2 Ping IP address IpAddress
x .2.11.5.0 wdg2NumberOfRestarts read-write Watchdog 2 Max Number of restarts INTEGER (1..253)
14.15 Monitor and control
OID Name Access Description Syntax
x .3.1.0 digitalInput1State read-only Digital Input1 state INTEGER { closed(0), open(1) }
x .3.2.0 digitalInput2State read-only Digital Input2 state INTEGER { closed(0), open(1) }
x .3.3.0 relay1State read-write Relay1 state INTEGER { off(0), on(1) }
x .3.4.0 relay1Pulse read-write Relay1 pulse INTEGER { off(0), on(1) }
x .3.5.0 relay2State read-write Relay2 state INTEGER { off(0), on(1) }
x .3.6.0 relay2Pulse read-write Relay2 pulse INTEGER { off(0), on(1) }
x .3.7.0 voltage1x10Int read-only Voltage1 x10 in integer format INTEGER{ 0..1000 }
x .3.8.0 voltage2x10Int read-only Voltage2 x10 in integer format INTEGER{ 0..1000 }
x .3.9.0 temp1x10Int read-only Temperature1 x10 in integer format INTEGER{ -400..1250 }
x .3.10.0 temp2x10Int read-only Temperature2 x10 in integer format INTEGER{ -400..1250 }
x .3.11.0 humi1x10Int read-only Humidity1 x10 in integer format INTEGER{ 0..1000 }
x .3.12.0 humi2x10Int read-only Humidity2 x10 in integer format INTEGER{ 0..1000 }
x .3.13.0 configurationSaved read-write Configuration save status INTEGER { unsaved(0), saved(1) }
x .3.14.0 restartDevice read-write Restart device INTEGER { cancel(0), restart(1) }