Teracom TCW122B-WD, Руководство пользователя

Страница: 10 / 16

TCW122B-WD_R2 ( Firmware version 2.xx ) Page 10
13. 1-Wire Bus
1-Wire is a registered trademark of Maxim Integrated Products, Inc. It is designed to connect
several sensors over a short wiring. The bus carries power and a single data wire. It is not suitable for
long distances or environments with EMC interference. We strongly recommend to read Maxim’s 1-Wire
tips at
http://www.maxim-ic.com/app-notes/index.mvp/id/148 .
We recommend keeping the total wiring length under 60m, although functionality has been
achieved in longer distance. We cannot guarantee error-free operation over mentioned wiring length.
We guarantee proper operation only with our 1-Wire sensors series TST1XX and TSH2XX.
14. Control and monitoring using SNMP
TCW122B-WD can be configured and monitored through SNMP (Simple Network Management
Protocol). This could be done using every SNMP v.1 compatible program. Parameters that can be
changed, are grouped according to their functions in the tables below. To obtain a valid OID number it is
necessary to replace the “x” symbol with ”1.3.6.1.4.1.38783”. To save the changes
configurationSaved
(OID x.3.13.0) should be set to "1".
14.1 Product
OID Name Access Description Syntax
x .1.1.0 name read-only Device name String
x .1.2.0 version read-only Firmware version String
x .1.3.0 date read-only Release date String
14.2 Setup -> network
OID Name Access Description Syntax
x .2.1.1.0 deviceIPAddress read-write Device IP address IpAddress
x .2.1.2.0 subnetMask read-write Subnet Mask IpAddress
x .2.1.3.0 gateway read-write Gateway IpAddress
x .2.1.4.0 deviceMACAddress read-write Device MAC Address OCTET STRING (SIZE(6))
x .2.1.5.0 dhcpConfig read-write DHCP configuration ON/OFF INTEGER { off(0), on(1) }
x .2.1.6.0 dns read-write Domain Name Server address IpAddress
x .2.1.7.0 hostName read-write Device Host name String (SIZE (0..38))
14.3 Setup -> VLAN
OID Name Access Description Syntax
x .2.2.1.0 vlanStatus read-write VLAN status ENABLED/DISABLED INTEGER { disabled(0), enabled(1) }
x .2.2.2.0 vlanId read-write VLAN ID (0 – 4095) INTEGER (0..4095)
14.4 Setup -> macFilter
OID Name Access Description Syntax
x .2.3.1.0 filterMACAddress1 read-only MAC Filter 1 OCTET STRING (SIZE(6))
x .2.3.2.0 filterMACEnable1 read-write MAC Filter 1 ENABLED/DISABLED INTEGER { disabled(0), enabled(1) }
x .2.3.3.0 filterMACAddress2 read-write MAC Filter 2 OCTET STRING (SIZE(6))
x .2.3.4.0 filterMACEnable2 read-write MAC Filter 2 ENABLED/DISABLED INTEGER { disabled(0), enabled(1) }
x .2.3.5.0 filterMACAddress3 read-write MAC Filter 3 OCTET STRING (SIZE(6))
x .2.3.6.0 filterMACEnable3 read-write MAC Filter 3 ENABLED/DISABLED INTEGER { disabled(0), enabled(1) }