Teracom TCW122B-WD, Руководство пользователя

Страница: 8 / 16

TCW122B-WD_R2 ( Firmware version 2.xx ) Page 8
Authentication details for WEB access to TCW122B-WD can be set in the last section. Only one user is
supported.
11.5 SNMP Setup page
TCW122B-WD
supports SNMP v.1. This enables the device to be part of large monitoring and control
networks. The possible settings for “SNMP” section are:

SNMP Configuration – enable/disable SNMP;

SNMP Port – allows standard port changing;

Write/Read community – performs client authentication;

SNMP Traps – enable/disable SNMP trap messages;

IP address – IP address of the receiving host;

Community string – performs client authentication;

Trap Interval - time interval in seconds for SNMP trap messages;

Max. Traps number – maximum number of SNMP trap messages sent, if trap condition is
present.
SNMP traps are sent if:

event occurs (status change) on Digital Input 1 or Digital Input 2;

measured voltage on Analog Input 1 or Analog Input 2 goes outside the range;

measured temperature goes outside the range;

measured humidity goes outside the range;

restart condition.