Teracom TCW122B-WD, Руководство пользователя

Страница: 11 / 16

TCW122B-WD_R2 ( Firmware version 2.xx ) Page 11
14.5 Setup -> SNMP
OID Name Access Description Syntax
x .2.4.1.0 snmpConfiguration read-write SNMP Configuration INTEGER { disabled(0), enabled(1) }
x .2.4.2.0 trapEnabled read-write TRAP messages ENABLED/DISABLED INTEGER { no(0), yes(1) }
x .2.4.3.0 trapReceiverIPAddress read-write TRAP receiver IP address IpAddress
x .2.4.4.0 trapCommunity read-write TRAP community String (SIZE (0..13))
x .2.4.5.0 trapInterval read-write TRAP messages interval INTEGER (1..253)
x .2.4.6.0 maxNumberOfTraps read-write Maximum number SNMP traps INTEGER (1..253)
14.6 Setup -> oneWireSensor1 -> temperature1
OID Name Access Description Syntax
x .2.5.1.1.0 temperature1Min read-write Temperature1 range (min. value) INTEGER (-400..1250)
x .2.5.1.2.0 temperature1Max read-write Temperature1 range (max. value) INTEGER (-400..1250)
x .2.5.1.3.0 temperature1Hyst read-write Hysteresis INTEGER (0..1250)
14.7 Setup -> oneWireSensor1 -> humidity1
OID Name Access Description Syntax
x .2.5.2.1.0 humidity1Min read-write Humidity1 range (min. value) INTEGER (0..1000)
x .2.5.2.2.0 humidity1Max read-write Humidity1 range (max. value) INTEGER (0..1000)
x .2.5.2.3.0 humidity1Hyst read-write Hysteresis INTEGER (0..1000)
14.8 Setup -> oneWireSensor2 -> temperature2
OID Name Access Description Syntax
x .2.6.1.1.0 temperature2Min read-write Temperature2 range (min. value) INTEGER (-400..1250)
x .2.6.1.2.0 temperature2Max read-write Temperature2 range (max. value) INTEGER (-400..1250)
x .2.6.1.3.0 temperature2Hyst read-write Hysteresis INTEGER (0..1250)
14.9 Setup -> oneWireSensor2 -> humidity2
OID Name Access Description Syntax
x .2.6.2.1.0 humidity2Min read-write Humidity2 range (min. value) INTEGER (0..1000)
x .2.6.2.2.0 humidity2Max read-write Humidity2 range (max. value) INTEGER (0..1000)
x .2.6.2.3.0 humidity2Hyst read-write Hysteresis INTEGER (0..1000)
14.10 Setup -> analogInput -> input1
OID Name Access Description Syntax
x .2.7.1.1.0 voltage1Min read-write Voltage1 alarm range (min. value) INTEGER (0..1000)
x .2.7.1.2.0 voltage1Max read-write Voltage1 alarm range (max. value) INTEGER (0..1000)
x .2.7.1.3.0 voltage1Hyst read-write Voltage1 hysteresis INTEGER (0..1000)
14.11 Setup -> analogInput -> input2
OID Name Access Description Syntax
x .2.7.2.1.0 voltage2Min read-write Voltage2 alarm range (min. value) INTEGER (0..1000)
x .2.7.2.2.0 voltage2Max read-write Voltage2 alarm range (max. value) INTEGER (0..1000)
x .2.7.2.3.0 voltage2Hyst read-write Voltage2 hysteresis INTEGER (0..1000)
14.12 Setup -> relay
OID Name Access Description Syntax
x .2.9.1.0 relay1ControlledBy read-write Relay1 control item INTEGER { manual(0), watchdog1(1) }
x .2.9.2.0 relay2ControlledBy read-write Relay2 control item INTEGER { manual(0), watchdog2(1) }
x .2.9.3.0 relayPulseWidth read-write Relay Pulse Width INTEGER{ 1..253 }