Tennant T600 EE, Руководство оператора

Страница: 33 / 41

MAINTENANCE
Tennant T600 EE (04-2018)
33
HYDROLINK
®
BATTERY WATERING SYSTEM
(Trojan
®
Battery OPTION)
The following instructions are for models equipped with
the HydroLink battery watering system option.
The optional HydroLink battery watering system
provides a safe and easy way to maintain the proper
electrolyte levels in your batteries. It is designed
exclusively for Trojan flooded (wet) lead-acid batteries.
FOR SAFETY: When servicing machine, wear
personal protection equipment as needed. Avoid
contact with battery acid.
Before using the battery watering system check hoses
and connections for damage or wear.
1. Fully charge batteries prior to using the battery
watering system. Do not add water to batteries
before charging, the electrolyte level will expand
and may overflow when charging.
2. After charging batteries, check the battery
electrolyte level indicators located on the battery
covers (Figure 71). If the level indicator is white
add water as described in the following
instructions. If the level indicators are black the
electrolyte is at the correct level, no water is
required.
FIG. 71
3. Locate the battery fill hose coupler inside the
battery compartment. Remove the dust cap and
connect the hand pump hose (Figure 72).
FIG. 72
4. Submerge the other end of the hand pump hose
into a bottle of distilled water (Figure 73).
Distilled
Water
FIG. 73
5. Squeeze the bulb on the hand pump hose until firm
(Figure 74). The level indicators will turn black
when full.
FIG. 74
6. After adding water, replace the dust cap on the
battery fill hose and store the hand pump hose
inside the machine's battery compartment for future
use.