OPERATION
14
Tennant T600 EE (04-2018)
FILLING SOLUTION TANK
FOR SAFETY: Before leaving or servicing machine,
stop on level surface, turn off machine and remove
key.
1. Remove the cap from the solution tank. Insert the
fill hose into the yellow strainer. The ribs at bottom
of strainer will hold hose in place while filling
(Figure 16).
FIG. 16
2. Fill the solution tank with water (140°F/60°C
maximum temperature). Stop filling when level
reaches the “32 G/120 L” mark on the solution tank
indicator (Figure 17). Pour a recommended
cleaning detergent into the solution tank according
to mixing instructions on the container.
FIG. 17
ATTENTION:
Only use commercially approved
cleaning detergents. Machine damage due to improper
detergent usage will void the manufacturer's warranty.
WARNING: Flammable materials can cause an
explosion or fire. Do not use flammable materials
in tank(s).
3. Turn off the water supply and remove the fill hose
from yellow strainer.
4. Replace the cap on the solution tank.
USING SOLUTION TANK AUTO-FILL
(OPTION)
FOR SAFETY: Before leaving or servicing machine,
stop on level surface, turn off machine and remove
key.
1. Connect the quick-disconnect auto-fill coupler to
the water supply hose and connect the nipple fitting
to the machine (Figure 18).
FIG. 18
2. Press the quick-disconnect coupler into the nipple
fitting unit it clicks (Figure 19). To prevent hose
from being pulled out while tank is being filled, turn
collar on coupler clockwise to lock connection.
FIG. 19
3. Before filling the solution tank with the auto-fill
option make sure the solution tank cap is securely
in place (Figure 20).
FIG. 20
Содержание T600 EE
Страница 4: ...CONTENTS 4 Tennant T600 EE 04 2018...